Product description
Solar WiFi rear AHD HD car reversing camera in license plate 170° angle of view and 2100 mAh rechargeable battery + 5" AHD monitor. Camera set from PROFIO ELECTRONICS has 2 solar panels that provide enough energy for camera operation and a built-in transmitter. Camera It is equipped with a built-in rechargeable 2100mAh lithium battery, which is connected to a solar panel. When the monitor is turned on, a work command will be sent to the camera, after receiving this signal, the camera will immediately switch from standby mode and send the image to the monitor. An USB charging cable is provided for initial battery charging, later the battery recharges itself by sunlight.
WiFi AHD rear camera has HD 1280 x 720px resolution, CMOS image sensor and 170° viewing angle. This HD camera meets the IP67 degree of protection, which makes it waterproof, dustproof and resistant to mechanical damage. It is recharged by sunlight and thanks to the transmitter with a frequency of 2400 ~ 2485,5 MHz, it provides real-time image transmission.
Built-in battery: 2100 mAh. The battery icon is located in the upper right corner of the screen and indicates the relative capacity of the camera's built-in lithium battery. The signal strength of the received image is in the upper left corner of the screen. During normal use, the camera is kept charged by sunlight. For example, if you store your car in a garage (or don't expose the camera to sunlight regularly) for more than one month, you may need to charge it first via the DC charging port.
When the monitor is turned on but still remains in standby mode, the red indicator light does not work. After pressing the power button, the light turns on and flashes rapidly. When the monitor is working, the light goes out. The solar wireless reversing camera can display the image behind the vehicle when reversing, or while driving when you need to have an overview of what is happening on the road behind your vehicle. This set is suitable for cars or other vehicles or trailers.
Camera specifications:
Model: PROFIO KI89
Operating current (when transmitting): <300 mA
Resolution: 1280 x 720
Viewing angle: 170°
Image sensor: CMOS
Image quality: Max 30 fps
Battery capacity: 2100 mAh
Camera assembly: IP 67
Monitor specifications:
Model: PROFIO Monitor SN6953
LCD screen size: 5,0"
Power cord fuse: 3A
Operating current: <150 mA
Effective pixels: 800 x 480
Image display setup time: 45 seconds (default),
90 seconds, 60 seconds and 30 seconds for automatic adjustment when needed.
Transmitter Specifications:
Frequency: 2400 ~ 2485.5 MHz
Wireless transmission: 100M in open space
Operating Temperature: 14°~ 140°F (-10°~ 60°C)
Package contents:
1x HD camera
1x HD monitor
1x charging cable for car ignition
1x power cable
1x holder
1x mounting screws
1x user manual