Product description
3m extension cable for permanent power supply of the car camera, powered from the car battery via the OBD interface - continuous power supply for 24 hours will enable monitoring of the vehicle in parking mode. OBD power cable - special 10-pin cable intended for car cameras with GPS monitoring for models from PROFIO ELECTRONICS - PROFIO X2, PROFIO X4, etc. with a 3-meter extension without installation. This cable is connected to the power supply from the car battery via the OBD interface and ensures continuous power supply 24/7.
The ACC mode monitors the vehicle's on/off status and switches the camera to the ON position accordingly when the car is started. When the engine is turned off, it disconnects the camera from the battery. The 24-hour power mode guarantees continuous monitoring of the car camera. In this mode, the OBD cable will power the dashcam even after the engine is turned off. Both modes can be switched directly on the body of the OBD cable.
Parameters:
Normal working voltage 12V
The module can output a current of 2,1A
Output module 12V
Operating current module 2,1
Operating temperature: -40°C to +90°C
Storage temperature: -65°C to +150°C
Contents again:
1x OBD extension cable
